Wednesday, January 4, 2017

Coal stage revisited

The start of the New Year had me addressing a few things on the modelling front. I spent a little time working out what conventions/shows etc I was going to attend this year (in a post on 'the Eugowra Branch', my other blog) and realised that I'd not posted an update on Splitters for a while.

Previously I'd shown you the top of the coal stage. Next was to build the mount for it. I want to be able to complete this project at the workbench so a base will be necessary also. The data sheet makes this job very easy. I used some dowel, and basswood and set about staining it before building, hopefully to make the job a little easier.

The stand is fairly straightforward, a simple jig to build each of the uprights
 Once all the uprights were built I installed them as you can see here.
 Then once it was all dry I drilled the posts and added the bolt detail. There are a lot more bolts present in the actual stage, but for the sake of my sanity, and what you can see I've only added them where they are plainly seen. 
 Out with the sculptamold to cover up about a third of my work. I wanted it to seem like it was part of scene not sitting on top of it. It also gives you a better idea of how it will fit into the scene. Anyone who has read some of my previous posts will see that the 'scene' of buildings for behind the stage are not there. I did enjoy working on them, but it just seemed too busy for a small layout like mine. I have a few other ideas for this area instead, stay tuned!
 The early coal stage was designed around the common D wagon, rather than an S. It has a smaller opening and needs to be set at a height compatible with this wagon. A trial fit in this location is seen here. The stark colour of the sculptamold will be covered up soon.
 A base colour is on the, well, base, now. I will build up the base  a bit with scatter and weeds, so that I don't need to get in there after it is placed.
That'll do for today. 
Have a great week!
Oorroo!
Geoff.

1 comment:

  1. Hi Geoff. It's always good to an update on your layout.Nice work. Pete

    ReplyDelete